You need to push down on that middle tab and then pull back. It might look confusing because it’s broken, but that piece sticking up between the blue parts is what you push down on. Once you do, just pull it back, and it should come apart.
@Phoenix
Middle tab…hmm, I’ll take a look.
Yeah, it’s a bit tricky since it’s broken. Look below that notch for the tab to push in.
Yeah, it’s a bit tricky since it’s broken. Look below that notch for the tab to push in.
Got it off, finally! But the new plug has six prongs, and the old one only has two slots.
If it’s giving you that much trouble, you could just break the locking tabs with a screwdriver. There’s a video on YouTube showing how to secure it with a zip tie if it ends up too loose.
Orion said:
If it’s giving you that much trouble, you could just break the locking tabs with a screwdriver. There’s a video on YouTube showing how to secure it with a zip tie if it ends up too loose.
Thanks, I got it unplugged, but the new one has a completely different plug. Not sure what to do with it now.
Push the middle down and try using needle nose pliers, but go slow.
Got the harness off, thanks for the help. But now the new plug has six slots, and the old one only has two. I’m at a loss on how to connect this.